PA6 B3EG6 German Basf Inc property data

①material description specification levels: injection molding grade color: -

Use summary: -

Note: the characteristics: glass fiber reinforced, requiring high rigidity and dimensional stability, thermal aging of components.

The raw material technical data performance project test conditions [state] test method test data data unit

Mechanical properties tensile elastic modulus of dry / wet - 9500/6200 MPa

Tensile yield stress ( V=50mm/min ) dry / wet - 185/115 MPa

Fracture stress ( V=50mm/min ) dry / wet - 185/115 MPa

Elongation at yield ( V=50mm/min ) - 3.5/8% of dry / wet

Elongation ( V=50mm/min ) - 3.5/8% of dry / wet

Bending modulus of dry / wet - 8600/5000 MPa

Bending strength of dry / wet - 270/190 MPa

Card impact strength of +23 ℃dry / wet - 95/110 KJ/m2

Card impact strength 30 - 80 KJ/m2℃ dry

Card notch impact strength of +23 ℃dry / wet - 15/30 KJ/m2

Card notch impact strength 30 ℃dry / wet - 11 KJ/m2

Notch impact strength of +23℃, dry / wet - 15.5/20 KJ/m2

Ball indentation hardness of dry / wet - 220/150 MPa

Electrical properties of dielectric constant of 1MHz wet / dry --- 3.8/6.8 ---

Loss angle 1MHz, dry / wet --- 0.023/0.22 ---

Volume resistance of dry / wet - 1015/1012 Ω.Cm

Surface resistance of dry / wet - 1013/1010 Ω

Dielectric strength K20/P50, dry / wet - 80/70 KV/mm

Relative arc index CT1 wet / dry - 575 - CTI

Thermal energy heat capacity ratio dry - 1.5 J/ ( g.K )

Maximum use temperature - 200 ℃

Temperature index in 20000h/5000h decreased tensile strength of 50% - 120/150 ℃

Linear coefficient of thermal expansion ( 23-80 )℃, dry - 2-2.5/6-7 10-5/K

Thermal conductivity of dry - 0.28 W/ ( m.K )

Heat distortion temperature 1.8MPa load, dry - 210 ℃

Heat distortion temperature 0.45MPa load, dry - 220 ℃

Other performance impact, failure energy +23 ℃, dry / wet - 10/30 J

歡迎你們的咨詢和來電,本公司是一家專業從事PA尼龍工程塑料經營單位,擁有先進的生產設備和檢測設備,能研發適合客戶個性化產品，同時也銷售各種塑膠原料。公司主要產品：ABS.PC.PC+ABS合金,POM.EVA.PA尼龍.PBT.TPV.TPE.LCP.PMMA.PPS.PPO.TPU.鐵氟龍；各種阻燃增強．耐寒．增韌．高光．耐磨．抗震耐腐蝕．合金等系列．品種齊全、價格合理 公司產品廣泛應用于電子電器．軍工．汽車．鐵路．紡織．農業．家具．鞋頭．等領域的應用材料．是以塑代鋼．以塑代木．以塑代瓷的典型替代材料．